RCP2 High Thrust
Type
The newly developed RCP2-RFA/RFW type from the product series
RC RoboCylinder stands one out due to one for maximum holding
load depending on execution of up to 6400 N into resting position.
This means one up to 8 subject and higher retention force in comparison
with the normal explanation and makes use possible into raising-tracking
processes of heavy materials.
Ball circulation spindle and rod look after for pressure operating
with very high impulsive force.
Speeds have at an axis piston stroke of 50 ~ 300 mm of the push
bar explanation mm/s obtained of 63 ~ 250 for themselves.
The positioning repeatability lies with ± 0.02 mm for an authorized
load of 80 ~ 150 kg (depending on explanation).
The stepper motor with incremental encoder permits max. 64 programmable
positions.
The control is carried out via standard interfaces (E/A or RS486)
and is cut to size on the use of an industry usual PLC .
For holding loads > 1 kN: RCP2-RFA
The dust-/splash-proof model RCP2-RFW is rated to IP 54.
Applicable Controllers
 Download
RCP2 RFA/RFW Type Datasheet (678 KB)
|
