| |
| DX-300 DIGITAL DISPENSER and CONTROLLER |
The DX-300 Digital Dispenser/Controller offers the option of
programming up to 10 programs. It is intuitive to use and allows
for reproduction of sequences of beads or dots with high repeatability.
The system includes an adjustable vacuum
feature for controlling drip of fluids between dispense cycles.
A vacuum gauge is included tmonitor suck-back.
The modern-style cabinet has a small
footprint and conserves workspace through a design that allows
multiple units tbe stacked and fastened on top of each other.
A highly responsive air pressure and vacuum management system,
coupled with a digital timing circuit, provides consistent
and repeatable fluid dispensing and material waste control.
Available in two versions of operating
pressure: 0 to100 psi for general applications, and 0 to 15
psi for specific low viscosity applications. The DX-300/315
Series is immediately usable anywhere in the world with its
accompanying tools, accessories and unique universal power
supply. |
click
to enlarge
|
Key Features:
Typical Applications:
To spray fine mist of low viscosity fluids such as: conformal coating,
solvent, oil, etc.
- User programmable manual purge and automatic
dispense cycle settings (program and time)
- 10 programmable memories for storing and
recalling most frequently used dispensing cycle timing
- "Sequence Mode" for executing
multiple programs
- "Teach Mode" for determining
the dispensing time required when dispensing output is unknown
- Adjustable vacuum and vacuum-driven "suck
back" to control material "tailing" and waste
- DX-300 controls the following Techcon
valves:
- TS941 / TS941A Spool Valves
- TS1212 Pinch Tube Valve
- TS5322 / TS5322D Mini Spool Valves
- TS5420 / TS5420SS Needle Valves
- TS5440 Micro-shot Needle Valve
- TS5600 Series Diaphragm Valves
- Stackable to conserve work space when
multiple DX-300/315 are used together
- Universal power supply for worldwide use
| Technical Specifications |
| Size |
6"W x 7"H x 6.5L" (15.2 x 17.8
x 16.5 cm) |
| Weight |
3.1lb (1.4kg) |
| Cycle Rate |
1,200 cycle/minute |
| Timing Range |
0.008 - 99.999 seconds |
| AC Input Voltage |
100 - 240Vac |
| AC Input Frequency |
50 - 60 Hz |
| Initiate Circuits |
Foot switch |
| Cycle Mode |
Continue, Interrupt and Purge |
| Meets or Exceeds |
CE, TUV-GS, NRTL and eK |
| Warranty |
1 year |
| Part No / Description |
| DX-300 |
Digital Dispenser 0 to 100 psi (0-6.9 bars) |
| DX-315 |
Digital Dispenser 0 to 15 psi (0-1.03 bars) |
|
|
|
