| |
| TS1201 DISPENSE PEN |
The TS1201 Dispensing Pen utilizes a disposable molded pinch
tube assembly, designed to handle a wide variety of fluids
- from adhesives and lubricants to sealants and masks. Gravity
or pressure fed, the pen has a built-in shot and flow rate
control for optimum repeatability. The TS1201 comes with a
pre-assembled applicator pen, three spare pinch tube assemblies,
an assortment of disposable dispensing tips, a 24" hose
and a 1/4 NPT Luer Lock adapter.
Replacement pinch tube assemblies
are sold in packages of ten.
|
|
| Specifications |
| Size |
127mm x 34mm |
| Weight |
36g |
| Fluid Inlet |
Female Luer Lock |
| Fluid Outlet |
Male Luer Lock |
| Air Inlets |
N/A |
| Working Air Pressure |
N/A |
| Wetted Parts |
Polyethylene (standard)
Polyurethane (optional) |
| Minimum Operating Air Pressure |
50 psi |
| Maximum Material Pressure |
500 psi |
| Typical Dispense Performance |
| Minimum Shot Size (water) |
0.0075cc |
| Flow Rate at 60 psi (water) |
1680 ml/min or 0.44
gpm |
| Material Viscosity Range |
Up to 45,000 CPS |
|
|
|
