STRUCTALIT 303 product series offers a selection of four multipurpose, maximum bond strength epoxy adhesives, porvides maximum adhesion to virtually all common materials such as wood, glass, rubber, plastics, ceramics, metal, concrete and bonds equally well to the more difficult to bond substrates : polyethylene, polypropylene, Nylon, Tedlar, Teflon, Rulon, etc.

Non-critical mixing and simple room temperature bonding (heat may also be used to hasten curing).

STRUCTALIT 303 adhesive series complies with the requirements of Military Specification MIL-A-14042 and Naval Ordnance2662718.

Description : Paste Consistency
App. Viscosity Range : 1000000 cps (25^oC)
Specific Gravity : 1.2 - 1.3 (25^oC)
Operating Temperatures : -50^oC +120^oC
Volume Resistivity : 1.2 x 10¹² ohm-cm
Dielectric Strength : 425 volts/mil
Flexural Strength : 950 kg/cm²

STRUCTALIT 501 and 516B-C Epoxy resin is a low viscosity epoxy resin which is ideal coating many differenf substrates.

516B-C is a flexible and 501 is a hard resin.

It is commanly used as a protective / decorative coating for : tables, bar tops, photos, plaques card cases and jewelry. This durable material does not require any polishing to polishing to produce a high gloss. Normally only one coat is required to produce a deep attractive finish. Sturctalit 501 is not recommendet for exterior uses.

Structalit 501 resin system is a two component system. The resin is mixed in 2 to 1 hardener. Hardeners generally used for coating flat items, curved or dapped surfaces.

APPLICATIONS
Adhesives
Coatings
Castings
Potting
Laminating
Jewel glaze